Platinum Cure Liquid Silicone for Making Skull Mold

Product Details
Customization: Available
Material: Organic Silicone
Application: Industrial
Still deciding? Get samples of US$ 1/kg
Request Sample
Gold Member Since 2020

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

to see all verified strength labels (22)
Find Similar Products

Basic Info.

Model NO.
902-15, 902-20, 902-30, 902-35
MOQ
200kg
Form
Liquid Silicone
Transport Package
Plastic or Metal Pail on Pallets
Specification
10KG, 20KG, 40KG, 50KG
Trademark
XD silicone
Origin
Beijing
HS Code
3910000000
Production Capacity
200 Ton /Week

Product Description

Also called condensation-cure silicone mold rubber,A / B is composed of two components,
room-temperature curing silicones. Molds made from these rubbers exhibit high tear strength, good release properties, and resistance to high temperatures.
 these are high-tear silicone mold rubbers,Tin cured silicone molds are used for casting wax, gypsum, polymer modified gypsum, etc. but are best known for standing up to production casting of urethane, epoxy and polyester resins. They are also good for casting low temperature melt metal alloys.


Application:
These rubbers are commonly used in Sculpture & Foundry, Architectural Reproduction & Restoration, Foam, Plastic & Plaster Millwork & Ornamentation, Theming & Display, and Candle Making applications.
 
      Model 902-15 902-20 902-30 902-35
colcur white white white wihite
Hardness(ShoreA) 15 20 30 35
Elongation(%) 480 450 430 400
Viscosity(mixed25ºCmpa.s) 20000±2000 20000±2000 25000±2000 25000±2000
Tear-strength(kgf/c)≥ 21 22 21 22
shrinkagerate(%)≤ 0.2 0.2 0.2 0.1
Mixing ratio(A:B) 100:4 100:4 100:4 100:4

How to use:
1.A and B must be mixed evenly into a clean plastic or metal container, The bottom and walls of the container must be scraped well to ensure that the silicone is mixed with the curing agent.

2.The pre-operation time of the mixed is 30-40 minutes at room temperature, and the product prototype is poured by vacuum defrosting.The product can be cured completely at room temperature of 3-4 hours and heated at 80-120ºC for 30 minutes.
3. When pouring or brushing mold for medium or large products, it is recommended to pour or brush 2-3mm thick silica gel on the surface of the product to fully and completely contact with the prototype.
4.At  25ºC, A/B is fully mixed and stored safely for 30-40 minutes.The higher the temperature, the shorter the storage time.
Package: 

10KG, 20KG, 25KG, 200KG or according to customer requirements.
Platinum Cure Liquid Silicone for Making Skull Mold


 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier